Mold can sneak up in any place where there is a lot of moisture. This could be around leaky pipes, refrigerators, wet basements, and even on your roof. Luckily, unlike the moldy cheese in your fridge, roofs with mold do not have to be thrown out.
With its slimy dark greenish hue, mold can quickly take over your roof, causing both rot and blot to your house’s structural beauty. Mold stains on roof shingles often make your roof look old and unkempt, with black streaks all over. And while moldy roofs are more common in areas with warm, humid summers, mold can thrive in a variety of conditions.
The truth is you can’t do much about algae and mold spores from the air landing on your roof. But when left untreated, the unsightly fungus can lead to the degradation of any roofing material. The most common roofing materials that are prone to mold are wood and asphalt, but metal, clay, and concrete can also degrade due to mold over time.
Also Read: Can Moss on a Roof Cause Leaks?
The good news is that with a little guidance or professional help, you can successfully remove mold from your roof. You can even perform a seasonal or annual roof clean-up to keep your roof mold-free and looking great.
Here is a step-by-step guide on how to remove mold from your roof!
Step 1 – Wear Proper Safety Gear
Before you get started, put on a pair of thick rubber gloves, a breathing mask, and goggles for eye protection. Since you will be using chemicals to treat your moldy roof, they can irritate your eyes and airways. Therefore, it is important to prioritize safety and wear protective gear throughout the process.
Similarly, protective clothing is also equally important. Wear a long-sleeved shirt and pants to keep your skin from coming into contact with bleach and other chemicals. Donning a pair of slip-resistant work boots is also a good idea to have proper traction on the slippery, mold-covered shingles.
Step 2 – Protect Your Yard and Nearby Plants
The best way to remove mold from roof shingles is by using a basic bleach solution. But bleach can be toxic to the nearby plants as well as harmful to your furniture in the yard. This is mainly because the bleach solution is likely to run off of the roof and onto your property, damaging plants and leaving stains on your furniture below.
Therefore, you should cover plants, furniture, and other items in your yard with tarps or plastic sheeting. Covering your grass with tarps can also prevent the bleach from soaking into the soil. If you do not have the time or means to do this step, you can simply spray water onto the grass and plants to dilute the bleach solution when it runs off of the roof.
Step 3 – Hose off and Scrub Away the Buildup
The next step is to carefully get on a ladder and hose off the treatment area with fresh water, spraying at a downward angle. Now use a soft-bristle scrub brush to remove the stuck-on mold and algae from the roof shingles. Make sure to scrub from the top down to avoid lifting shingles. Also, make sure not to scrape or pound on the roof and work in small sections at a time to prevent yourself from breaking the shingles.
Step 4 – Spray and Rinse the Roof With a Cleaning Solution
Using a powerful chemical agent like chlorine bleach is a great way to get rid of mold and other types of growth from your roof. All you have to do is mix one quart of bleach, one gallon of water, and ¼ cup (60ml) of trisodium phosphate (TSP). Now, disperse the cleaning solution on your roof by using a pump sprayer. The chlorine in the bleach will kill the mold-causing bacteria, while the TSP will remove mold stains and discoloration from the bleach.
Also Read: Is a Small Roof Leak Bad?
Continue spraying your entire roof until you see runoff. Once the solution starts running off of the roof, let it sit for 15-20 minutes to allow it to soak in. Next, snake the garden hose around and up the ladder with you. Rinse the entire roof with fresh water to wash away the concentrated chemicals. It is important to note that chemicals can cause permanent damage or discoloration to the shingles if not properly rinsed.
Step 5 – Prevent Future Mold Growth
Periodic roof treatments for mold can help you get rid of mold and algae from building up again. After the initial cleaning, you can give your roof a cleanup (if needed) every six to eight months. You can repeat this treatment as often as needed to fend off fresh growth.
Another good way to prevent future growth is by trimming back tree branches to allow direct sunlight to reach your roof. Every now and then, remove debris that accumulates on your roof, such as leaves and twigs that can retain moisture, leading to mold growth.
Mold might seem like a minor roofing problem, among others, but the mold damage can become irreparable over time. If left untreated, it can gradually make your roof so unstable that it might require Roof Replacement. Therefore, the best way to avoid expensive Roof Repairs and protect your investment is to have regular maintenance against mold.
That said, removing fungus, mildew, and mold stains from roof shingles is no easy feat. And for this reason, many property owners rely on experienced roofing contractors to get the job done.
If you are finding a moldy roof too overwhelming to deal with, contact Roof Crafters today.
In most cases, there is no need for a complete Roof Replacement due to a bit of mold. Our expert team offers the best roof repairs to help you get rid of mold while keeping your costs down.